410S Stainless Steel Sheet
Key Words：
Subclassification：
Stainless Steel Plate
WhatsAPP：
Product Information
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits adequate corrosion resistance similar to 410 and good oxidation resistance.
| Standard | ASTM,AISI,SUS,JIS,EN,DIN,BS,GB |
| Material | 201/202/301/302/304/304L/316/316L/309S/310S/321/409/ 410/420/430/430A/434/444/2205/904L etc. |
| Finish(Surface) | No.1/2B/NO.3/NO.4/BA/HL/Mirror |
| Technique | Cold Rolled / Hot Rolled |
| Thickness | 0.3mm-3mm(cold rolled) 3-120mm (hot rolled) |
| Width | 1000mm-2000mm or custom |
| Length | 1000mm-6000mm or custom |
| Application | Stainless steel sheets can apply to construction field, ships building industry, petroleum & chemical industries, war and electricity industries, food processing and medical industry, boiler heatexchanger, machinery and hardware fields. Stainless steel sheet can be made accordingto the customer's requirements. Fast delivery. Quality assured.Welcome to order. |
Technical data
Martensitic stainless steel sheets AISI 410
| Chemical Composition of 410 | ||||||
| Grade | The Element (%) | |||||
| C | Si | Mn | P | S | Cr | |
| 410 | 0.08 - 0.15 | ≤1.00 | ≤1.00 | ≤0.035 | ≤0.030 | 11.50 - 13.50 |
Equivalent Materials
| Grade | GB | DIN | AISI | JIS |
| 1Cr13 | 1.4006 | 410 | SUS410 |
410S is annealed, or softened, to make it less brittle. This is done by heating it to between 1600 – 1650°F (871 – 899°C), then air cooling it slowly at room temperature to relieve cold-working stresses.
Sometimes, if excessive large grains are encountered after annealing mildly cold-worked material, the annealing temperature should be decreased to a range of 1200 – 1350°F (649 – 732°C) range. However, it should never be increased to 2000°F (1093°C) or above due to embrittlement, which is the partial or complete loss of the material’s ductility, the opposite of the desired result of annealing 410S.
For maximum corrosion resistance to chemical environments, the 410S surface should be free of all heat tint or oxide formed during the annealing or hot working process. It is essential that all traces of oxide and surface decarburization be removed by grounding or polishing all surfaces. Afterwards, parts are immersed in a 10% to 20% nitric acid solution followed by a water rinse. This is to ensure the removal of any residual Iron.
After this step, stainless steel 410S parts are generally considered able to undergo welding by common fusion and resistance techniques, though special attention is paid in order to avoid brittle weld fractures during fabrication and to minimize discontinuities.
The main difference between stainless steel 410 and 410S is that 410 is a basic, general purpose, martensitic stainless steel that can be hardened whereas 410S is a lower Carbon modification of 410 stainless steel, more easily welded but possessing reduced mechanical properties. 410S stainless steel can be easily formed by drawing, spinning, bending, and roll forming.
pplications using 410S Chromium ferritic stainless steel have considerably increased in recent years in chemical industries as well as oil or gas transportation industries. Experiments to determine phase transformation temperatures are ongoing to determine the alpha to gamma transformation temperatures for this alloy in different cooling conditions. Results will determine how 410S can be best used in these industries.
Factory
Shandong Jiugang Metal Products Co., Ltd. was established in 2015, located in Hebei Province, with a factory area of 20000 square meters. We have obtained ISO9001 quality system certification and EU CE certification.
Packing And Delivery
We adhere to the management principle of "quality first, service first, continuous improvement and innovation, and customer satisfaction", with the quality goal of "zero defects, zero complaints". We are pleased to receive your inquiry and will reply as soon as possible.
Application
The main supply fields are: aerospace, national defense equipment, military weapons, chemical industry, shipbuilding, nuclear energy, trains, containers, environmental protection, precision machining, auto parts, machinery, electronic products, molds, medical treatment Equipment, construction, decoration, etc.
Related Products
FAQ
Q1: Are You Manufacture or Trade Company?
A1: We are the professional manufacturer of stainless/carbon/galvanized steel products located in China. Welcome to contact us and visit our factory before you place orders.
Q2: Can I get free samples?
A2: Of course you can. We can produce according to your samples or technical drawings. Contact us by whatsapp or email to get free samples and you will get the sample after 3-7 working days.
Q3: How do you guarantee the quality?
A3: We can send free samples to you, we can accept third-party testing. We also have test certificate, every batch goods will be testing before shipment, and the testing report will delivery to you with your goods.
Q4:How many coutries you already exported ?
A4: Exported to more than 50 countries mainly from Qatar, America, Russia, Belarus, Saudi Arabia, United Arab Emirates, Kuwait, Brazil, Egypt, Turkey, Jordan, India, etc.
Q5:How long is your delivery time?
A5:Within 5 days for stock size, 7-15 working days for customized size.
Q6: Can you OEM or ODM?
A6: Yes, we have a strong developing team. The products can be made according to your request
Q7: What is the MOQ?
A7: If you are scheduling to place a small quantity order or trial order, feel free to contact us, we can meet your requirements.
Q8:What are the certifications for your products?
A8:We have ISO 9001, MTC, third parties' inspections are all available such SGS, BV ect.
Contact Us For Quotation
We use optional cookies to improve your experience on our website, including by connecting to social media, and to serve personalized advertising based on your online activity. If you reject optional cookies, we will only use cookies that are necessary to provide you with the service. Privacy Statement
WhatsApp:
Email:
Tel/WeChat
Office Address
15-10, Building J1, Wanda Plaza, 57 Gongye South Road, Jinan District, China (Shandong) Pilot Free Trade Zone
